Persistent reshaping of cohesive sediment towards stable flocs by turbulence.

Cohesive sediment forms flocs of various sizes and structures in the natural turbulent environment. Understanding flocculation is critical in accurately predicting sediment transport and biogeochemical cycles. In addition to aggregation and breakup, turbulence also reshapes flocs toward more stable structures. An Eulerian-Lagrangian framework has been implemented to investigate the effect of turbulence on flocculation by capturing the time-evolution of individual flocs. We have identified two floc reshaping mechanisms, namely breakage-regrowth and restructuring by hydrodynamic drag. Surface erosion is found to be the primary breakup mechanism for strong flocs, while fragile flocs tend to split into fragments of similar sizes. Aggregation of flocs of sizes comparable to or greater than the Kolmogorov scale is modulated by turbulence with lower aggregation efficiency. Our findings highlight the limiting effects of turbulence on both floc size and structure

A low-cost electricity generator for rural areas using a travelling-wave looped-tube thermoacoustic engine

This article describes the construction and preliminary testing of a pre-prototype thermoacoustic electricity generator to test the concept of a low-cost device for application in remote or rural areas of developing countries. A travelling-wave thermoacoustic engine with a configuration of a looped-tube resonator is designed and constructed to convert heat to acoustic power. Air at atmospheric pressure is used as the working gas, PVC tubing is utilized for the feedback pipe, whereas an inexpensive commercially available loudspeaker is adopted to convert the acoustic power, produced by the engine, to electricity. Preliminary experimental results are presented and discussed in detail. The results show that the approach is feasible in principle and it is possible to produce the electrical power levels in the order of 4-5 W with overall heat-to-electric efficiencies in the order of 1 per cent. Further work towards optimizing the device from the performance, manufacturing, and cost points of view is outlined

Effect of the food-to-microorganism (F/M) ratio on the formation and size of aerobic sludge granules

Laboratory experiments were carried out to investigate the effect of the sludge loading, or the food-to-microorganism (F/M) ratio, on the rate of aerobic granulation and the size of the granules in biological wastewater treatment. Four column batch reactors were used with a similar sludge suspended solids (SS) concentration of around 2000 mg/L. The reactors were fed with a glucose-based wastewater at different chemical oxygen demand (COD) concentrations, resulting in F/M ratios from 0.3 to 1.1 g COD/g SS-d. A higher F/M ratio appeared to promote faster formation of larger granules and a lower F/M ratio led to slower formation of smaller granules. Upon complete granulation, the granules became rather stable in size, and the mean diameter of the granules in different reactors increased from 1.2 to 4.5 mm linearly with the F/M ratio applied. Molecular analysis of the sludge did not show the domination of any particular bacterial species during the granulation process. It is apparent that applying different F/M ratios in different granulation stages, e.g., a higher F/M in the early stage and a reduced F/M in the later stage, can be an effective start-up strategy to facilitate rapid granule formation and sustain small and healthy granules in bioreactors. © 2011 Elsevier Ltd. All rights reserved.postprin

Granular activated carbon for aerobic sludge granulation in a bioreactor with a low-strength wastewater influent

Aerobic sludge granulation is rather difficult or impossible for the treatment of low-strength wastewater. In this study, a novel technique involving granular activated carbon (GAC) was developed for rapid aerobic granulation under a low organic loading condition. Laboratory experiments were conducted with two sequencing batch reactors (SBRs) running side by side. One reactor had fine GAC added to the sludge mixture, and the other had no GAC added. A low-strength organic wastewater with a chemical oxygen demand (COD) concentration of only 200 mg/L was used as the influent to the SBRs. The morphology, physical properties, and bacterial community structure of the sludge in the two reactors were characterized and compared throughout the experiments. The results showed that granules could not be formed in the SBR without added GAC. However, complete granulation was achieved in the SBR with GAC addition. Selective discharge of slow settling sludge was also essential to the granulation process. Adding GAC to the seed sludge mixture, together with the selective discharge of small and loose sludge flocs, facilitated the retention and growth of bacterial cells on GAC in attached-growth mode, leading to complete granulation. In addition, the use of GAC produced aerobic granules with strong cores to help maintain the long-term stability of mature granules. With granulation, the solid-liquid separation property of the sludge was greatly improved. Once granules were formed, the granules were quite stable and GAC addition was no longer needed. Therefore, adding GAC is a simple and effective strategy to initiate granule formation for complete sludge granulation in bioreactors treating low-strength organic wastewater. © 2011 Elsevier B.V. All rights reserved.postprin

Pneumococcal Serotype-Specific Antibodies Persist through Early Childhood after Infant Immunization: Follow-Up from a Randomized Controlled Trial

Background: In a previous UK multi-center randomized study 278 children received three doses of 7-valent (PCV-7) or 13- valent (PCV-13) pneumococcal conjugate vaccine at 2, 4 and 12 months of age. At 13 months of age, most of these children had pneumococcal serotype-specific IgG concentrations $0.35 mg/ml and opsonophagocytic assay (OPA) titers$8. Methods: Children who had participated in the original study were enrolled again at 3.5 years of age. Persistence of immunity following infant immunization with either PCV-7 or PCV-13 and the immune response to a PCV-13 booster at preschool age were investigated. Results: In total, 108 children were followed-up to the age of 3.5 years and received a PCV-13 booster at this age. At least 76% of children who received PCV-7 or PCV-13 in infancy retained serotype-specific IgG concentrations $0.35 mg/ml against each of 5/7 shared serotypes. For serotypes 4 and 18C, persistence was lower at 22–42$0.35 mg/ml against each of 4/6 of the additional PCV-13 serotypes; for serotypes 1 and 3 this proportion was 45% and 52%. In the PCV-7 group these percentages were significantly lower for serotypes 1, 5 and 7F. A pre-school PCV-13 booster was highly immunogenic and resulted in low rates of local and systemic adverse effects. Conclusion: Despite some decline in antibody from 13 months of age, these data suggest that a majority of pre-school children maintain protective serotype-specific antibody concentrations following conjugate vaccination at 2, 4 and 12 months of age. Trial Registration: ClinicalTrials.gov NCT0109547

Comprehensive transcriptomic analysis of cell lines as models of primary tumors across 22 tumor types.

Cancer cell lines are a cornerstone of cancer research but previous studies have shown that not all cell lines are equal in their ability to model primary tumors. Here we present a comprehensive pan-cancer analysis utilizing transcriptomic profiles from The Cancer Genome Atlas and the Cancer Cell Line Encyclopedia to evaluate cell lines as models of primary tumors across 22 tumor types. We perform correlation analysis and gene set enrichment analysis to understand the differences between cell lines and primary tumors. Additionally, we classify cell lines into tumor subtypes in 9 tumor types. We present our pancreatic cancer results as a case study and find that the commonly used cell line MIA PaCa-2 is transcriptionally unrepresentative of primary pancreatic adenocarcinomas. Lastly, we propose a new cell line panel, the TCGA-110-CL, for pan-cancer studies. This study provides a resource to help researchers select more representative cell line models

Distinct motivations to seek out information in healthy individuals and problem gamblers

As massive amounts of information are becoming available to people, understanding the mechanisms underlying information-seeking is more pertinent today than ever. In this study, we investigate the underlying motivations to seek out information in healthy and addicted individuals. We developed a novel decision-making task and a novel computational model which allows dissociating the relative contribution of two motivating factors to seek out information: a desire for novelty and a general desire for knowledge. To investigate whether/how the motivations to seek out information vary between healthy and addicted individuals, in addition to healthy controls we included a sample of individuals with gambling disorder—a form of addiction without the confound of substance consumption and characterized by compulsive gambling. Our results indicate that healthy subjects and problem gamblers adopt distinct information-seeking “modes”. Healthy information-seeking behavior was mostly motivated by a desire for novelty. Problem gamblers, on the contrary, displayed reduced novelty-seeking and an increased desire for accumulating knowledge compared to healthy controls. Our findings not only shed new light on the motivations driving healthy and addicted individuals to seek out information, but they also have important implications for the treatment and diagnosis of behavioral addiction

High-Speed, Heavy-Load, and Direction-Controllable Photothermal Pneumatic Floating Robot.

Light-fueled actuators are promising in many fields due to their contactless, easily controllable, and eco-efficiency features. However, their application in liquid environments is complicated by the existing challenges of rapid deformation in liquids, light absorption of the liquid media, and environmental contamination. Here, we design a photothermal pneumatic floating robot (PPFR) using a boat-paddle structure. Light energy is converted into thermal energy of air by an isolated photothermal composite, which is then converted into mechanical energy of liquid to drive the movement of PPFRs. By understanding and controlling the photothermal actuation, the PPFR can achieve an average velocity of 13.1 mm s-1 in water and can be modified for remote on-demand differential steering and self-sustained oscillation. The PPFR may be modified to provide a lifting mechanism, capable of moving 4 times the PPFR mass. Various shapes and materials are suitable for the PPFR, providing a platform for liquid surface transporting, water sampling, pollutant collecting, underwater photography, and photocontrol robots in shallow water

Electrosprayed Janus Particles for Combined Photo-Chemotherapy

This work is a proof of concept study establishing the potential of electrosprayed Janus particles for combined photodynamic therapy-chemotherapy. Sub-micron-sized particles of polyvinylpyrrolidone containing either an anti-cancer drug (carmofur) or a photosensitiser (rose bengal; RB), and Janus particles containing both in separate compartments were prepared. The functional components were present in the amorphous form in all the particles, and infrared spectroscopy indicated that intermolecular interactions formed between the different species. In vitro drug release studies showed that both carmofur and RB were released at approximately the same rate, with dissolution complete after around 250 min. Cytotoxicity studies were undertaken on model human dermal fibroblasts (HDF) and lung cancer (A549) cells, and the influence of light on cell death explored. Formulations containing carmofur as the sole active ingredient were highly toxic to both cell lines, with or without a light treatment. The RB formulations were non-toxic to HDF when no light was applied, and with photo-treatment caused large amounts of cell death for both A549 and HDF cells. The Janus formulation containing both RB and carmofur was non-toxic to HDF without light, and only slightly toxic with the photo-treatment. In contrast, it was hugely toxic to A549 cells when light was applied. The Janus particles are thus highly selective for cancer cells, and it is hence proposed that such electrosprayed particles containing both a chemotherapeutic agent and photosensitiser have great potential in combined chemotherapy/photodynamic therapy

Study of lead adsorption on activated carbons

In this study, the removal of lead (II) from water using commercial  activated carbons from wood and coconut shell were investigated in acidic medium (pH = 4). Atomic absorption spectrometer (AAS) was used to investigate initial (C0) and (equilibrium) (Ce) solution concentrations. Powder and granular activated carbons showed different adsorption capacity. The amount of Pb2+ adsorbed reached44.58, 38.96 and 39.06 mg/g for CPA, CGA 830 and CGA 1230 respectively at 25 °C. Langmuir and Freundlich adsorption models were used to represent the equilibrium data. Despite the high value of coefficient (R2) from Freundlich model, the best interpretation for the experimental data was given by the Langmuir model. The work showed that using powder activated carbon from wood exhibited relatively high adsorption capacity than activated carbon from coconut shell.Keywords: Lead, activated carbon, adsorption, Langmuir, isotherm